MF Digital SCRIBE SA 3000 - Manual (Page 41)

Scribe SA Standalone Series Operator’s Guide Document Revision: 05/31/06
Page 41
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the Multiple Images feature “enabled”, the steps are as follows:
• From the main operating screen depicted below:
• Load as many blank discs as are required into the recorders. Press the
“COPY” key on the keypad. The screen will now read:
• Press the “Start/Yes” key. The screen will now read:
The Scribe SA Standalone defaults to the first image (1). For the
purposes of this example, press the “1” key to select this image,
followed by the “Start/Yes” key. The screen will now read: