MF Digital DirectorEC OP OptiEC Printer - Manual

Director EC Office Publisher with
OptiEC Printer Installation Guide
Document Revision: 11/4/04
DIRECTOR EC OFFICE PUBLISHER INSTALLATION GUIDE
Minimum System Requirements for Director EC Office Publisher
• Minimum Pentium® 4 or compatible personal computer @ 2 GHz or faster
• Windows 2000 Professional (service pack 4.0 or higher) or Windows XP Professional
(service pack 1.0a or higher)
• 1 GB RAM
• 1 Hard Disk Controller Adaptec Brand Ultra 26160
• 1 18 GB SCSI 15,000 rpm Ultra 160 SCSI Hard Drive (formatted NTFS) as follows:
• 1 Basic Partition for System (C:) & 2 5GB NTFS Partitions (D:)(E:) – Temp folder in root on
each partition
• 2 Free PCI Slots
• 1 Free USB Internal Connection
• 1 Firewire B 1394 Card (Supplied by MD Digital)
• 1 Software Identifier Card (Supplied by MD Digital) Computer needs 3.5” power connector.
• 1 external Com port (COM1 or COM 2) – 2 ports needed if using Prism Plus or Spectrum 2
• Network 100/10Mbs on Board
• Video 1024 X 768
• One Parallel Port
• * A USB to Serial Converter can be used if no COM port is available.
THE DIRECTOR EC LOADER MUST BE INSTALLED ON COM PORT 2
THE DIRECTOR EC SOFTWARE MUST BE INSTALLED ON C:\ DRIVE
MF DIGITAL
121 Carolyn Blvd.
Farmingdale, NY 11735
001 631 249 9393
www.mfdigital.com