Levana LV-TW500 - Manual (Page 45)

45
Video Capture Filter
This allows you to change the image settings of the video; to adjust each setting click and drag the
tab along the bar. To open the video capture filter select “Options” →” Video capture filter.”
The following video settings can be adjusted:
• Brightness
• Contrast
• Hue
• Saturation
• Sharpness
• Gamma
• Backlight Compensation
Video Capture Pin
This allows you to manipulate the size of the video. The other options available through this menu are
not applicable to the LV-TW500. The other options will not adjust and adjusting them will prompt a
screen to appear telling you that the operation cannot be completed. To get to the video pin options
select “options” → “Video Capture Pin.”
Output Size:
Output size controls the size of the video screen that you see and the frame rate of the recorded video.
• To change these settings select the scroll down menu then select a size you would like. You
can choose from 640 x 480 or 320 x 240
• To lower the Frame Rate, use the up arrow next to the frame rate. The down arrow will
increase the Frame Rate to a maximum of 30.000
• The other options available in this menu are not applicable with the LV-TW500
• When you have adjusted the settings to your liking select apply to save and stay in the
menu, OK to save and exit the menu or Cancel to exit the menu without saving
Video Capture Filter
Video Capture Pin
STEP 8 - SOFTWARE - IN DEPTH