Levana LV-TW500 - Manual (Page 43)

43
TECH SEC
Upload event image onto FTP server when motion is detected:
This feature allows you to have an image uploaded onto your file transfer protocol server when
motion is detected. In order to have this function work you will need to have write access to an FTP
server (not provided by LEVANA). The photos will be uploaded on your FTP server as .JPGs.
Set FTP server notification:
1. Check the box next to FTP event snapshots to enable the software to sent photos to the server
when motion or noise is detected.
2. Select the settings box next to the box and a separate screen will appear. You need to fill in the
following information.
FTP address: The host name of your FTP server. This could be a full host name like
ftp.yourfileserver.com or in IP address form such as 216.12.36.244
User name: The user name you use to access the FTP server, most FTP user names
are case sensitive
Password: The password you use to access the FTP server, most FTP passwords are
case sensitive
Number of Snapshots: This is the number of snapshots you would like uploaded onto your FTP
server, you can choose from 1 to 5 snapshots to be loaded
Size: This option allows you to select what size the photo being uploaded
will be, the larger the resolution the more disk space will be used up
3. Once you have filled out all the information you can select OK to save and exit or Cancel to exit
without saving.
STEP 8 - SOFTWARE - IN DEPTH
LOAD FTP snapshot
FTP setup