LABEC V-18 - Manual (Page 17)

16/18 Manual
14
1↙
2↙
RETURN
+B
RETURN
Fig. 22
Note: The two formulas can be converted each other, it’s up to your habit to
choose anyone of them, but the operation is the same. C=KA+B is an example.
☺ Set Wavelength
Press 【GOTO λ】 in the pre-testing interface, input the testing wavelength by
pressing the numeric keypad. (Fig.23). Reference Page 7, you’ll get a detailed
instruction.
GOTO
λ λ λ λ
RETURN
Fig. 23
☺ Set Parameters
Press 【 SET
】 in the coefficient method pre-testing interface, 3 parameters
should be set before testing.(Fig. 24)
SET
RETURN
Fig. 24
Set Coefficient K
Move the cursor on “ Coefficient K” by pressing 【∧ ∧ ∧ ∧】 and 【∨ ∨ ∨ ∨】 , followed
Coefficient
1. A=KC+B
2. C=KA+B
Coefficient: A=KC+B
0.001 Abs
1.200 mg/l
546.0 nm
√ √ √ √Quantitative： ： ： ：
○ ○ ○ ○Standard Curve
● ● ● ●Coefficient
Coefficient: C=KA+B
0.001 Abs
1.000 mg/l
546.0 nm
Coefficient: A=KC+B
0.001 Abs
1.200 mg/l
546.0 nm √ √ √ √Coefficient
● ● ● ●Coefficient K
○
○ ○ ○Coefficient B
○
○ ○ ○Conc. Unit
Coefficient: A=KC+B
0.001 Abs
1.200 mg/l
546.0 nm
Coefficient： ： ： ：
WL=546.0nm
Please Input New：
： ： ：
WL=