Canon SC A60 - Manual (Page 170)

166
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• No image will appear on the LCD monitor when the
camera is connected to a TV monitor.
• The video output signal can be switched (NTSC or PAL)
to accommodate different regional standards (p. 181).
The default setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will
not display properly.
• If the TV is a stereo model, you can plug the audio plug
into either the left or right Audio In jack. Please refer to
the TV’s manual for details.
• A TV set cannot be used in mode.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○