Canon SC A60 - Manual (Page 159)

155
Pr
inting, T
ransf
err
ing
3
Select images for printing.
Single Images
• When the print type (p. 156) is
set to [Standard] or [Both], select
an image using the left or right
button. You can set the number of
copies (up to 99) to be printed
using the up or down button.
• When the print type (p. 156) is
set to [Index], select an image
using the left or right button and
mark or remove marks from
images using the up or down
button.
• You can use the same
procedures to select images in
index replay (3 images).
All the Images on a CF Card
• Switch to index replay (three
images).
• You can set one copy of each
image to print by pressing the
button, then selecting [Mark
All] using the up or down button,
and pressing the
button
again.
• When the print type is set to [Standard] or [Both], the
setting for the number of print copies can be changed for
each image. When [Index] is selected, the print settings
can be deleted. For the instructions on changing settings,
please reread Step 3 from the beginning.
• You can cancel all the settings by selecting [Clear all].
Number of Copies