Keri Systems HPP-100 - Manual (Page 38)

HPP-100 Hand-Held Programmer
Revision 3.3 32
Displaying the favorite reader list will now show:
1 2 3 4 5 6
+ + – – – –
Transfer a Card from the Master Reader to all Readers on the FRL [G]
Transferring a Card from the Master Reader to all Readers on the FRL is used to transfer
all time zone and system configuration attributes for one card from the Master Control
Unit to all other readers on the favorite reader list. To perform this command, you must
know the slot number of the card you wish to add.
Example . . . to transfer card 12 from the master reader to all readers on the favorite
reader list:
Press . . . [*] (selects all readers on the
favorite reader list)
[h] COMMAND [*]
ENTER OPTION
Press . . . [LVL] [9] [3]
TRANSFER CARDS
#: _ _ _ _ TO #: _ _ _ _
Press . . . [0] [0] [1] [2]
TRANSFER CARDS
#: 0 0 1 2 TO #: _ _ _ _
Press . . . [SEND]