Keri Systems HPP-100 - Manual (Page 17)

HPP-100 Hand-Held Programmer
Revision 3.3 11
Example . . . to set the close of business time to 6 P.M. (18:00 hours):
Press . . . [6] [1] [8] [0] [0] [SEND]
SET COB TIME
H: 1 8 M: 0 0
Card Management Functions
In the PXL-100 system, cards are managed by assigning them to a “Slot.” A slot is a list of
information that applies to a specific card. The information in a slot includes the slot’s
identification number, the card’s unique number code, and the time zone that applies to
that card. (In a PC programmed system, more information is applied to a card’s slot,
allowing for the identification and categorization of the individual the card is assigned to.)
Enroll a Card in a Slot and a Time Zone [G]
Enrolling a Card through the Master Control Unit provides the card with access
authorization to the security system. To enroll a card you must have an empty slot and a
time zone to assign the card.
Example . . . to enroll a card into slot 47, time zone 2:
Press . . . [ENRL]
ENROLL CARD[S]
#: _ _ _ _ TO #: _ _ _ _
Press . . . [0] [0] [4] [7] (the empty slot number where
the card is to be enrolled)
[LEVEL] [ZIP]
#: 0 0 4 7 TO #: _ _ _ _
Press . . . [L]
ENROLL CARD[S]
LEVEL: _
Press . . . [2] (the time zone the card is to be
assigned)
[SEND] [CLEAR]