Keri Systems HPP-100 - Manual (Page 30)

HPP-100 Hand-Held Programmer
Revision 3.3 24
Transfer Events to the Memory Module [N]
Transferring Events to the Memory Module allows you transfer event data from a Control
Unit to the Memory Module for transfer to another Control Unit or a PC system.
Example . . . to transfer events to the memory module:
Press . . . [0] [5] [SEND] (allow time for the data to
transfer)
DUMP EVENT LOG
[SEND] [CLEAR]
Erase the Memory Module [n/a]
Erasing the Memory Module allows you to erase data from the Memory Module to free it
for use again.
Example . . . to erase the memory module:
Press . . . [0] [6] [VOID]
ERASE MEM MODULE
[VOID] [CLEAR]
Erase Events in the Memory Module [n/a]
Erasing Events in the Memory Module allows you to erase event data from the memory
module to free it for use again.
Example . . . to erase event data in the memory module:
Press . . . [0] [8] [SEND]
ERASE EVENT LOG
[SEND] [CLEAR]