Start, Remove the band, St t – Motorola moto E User Manual
Page 4: Next
Start
let’s get up & running
Remove the band
The band around the edge of your phone covers the SIM and
memory card slots.
Caution: Don't use tools to remove the band—doing so may
damage your phone.
Put your finger in the bottom corner of
the band around the phone’s edge.
Pry the band off to expose the card slots.
1.
2.
Note:
To replace the band, align the top first, then match
up the Power and Volume keys. Snap on the bottom then,
press around the whole edge until the band is in place.
Put in the SIM & memory cards, replace the
band, & then power on
Note: In some countries, you can use a second SIM card.
Put in the SIM and optional microSD cards.
Caution: Make sure you use the correct size SIM cards, and
don’t use adapters with your SIM cards.
Replace the band & power on.
Press & hold
Power until the
screen lights
up.
Note:
To remove
a card, push
it in to release it.
Then slide it out.
R
R
2
1
Put the SIM and memory cards in.
With the gold contacts
facing up, push in a card.
The SIM card clicks in.
microSD
(optional)
SIM 1
SIM 2
(optional)
Micro SIM
SIM Nano SIM & Adapter
Start
Remove the band
Put in the SIM & memory cards, replace the