Philips FWI1000 - Manual (Page 35)

Troubleshooting
TAPE OPERATION/RECORDING
Recording or playback cannot be made. - Clean deck parts, see “Maintenance".
- Use only NORMAL (lEC 1) or lEC type II (CrOJ
tape.
- Apply a piece of adhesive tape over the missing
tab space.
The tape deck door cannot open. - Remove and reconnect the AC power plug and
switch on the system again.
GENERAL
The system does not react when buttons
are pressed.
- Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor
quality.
- Adjust the volume.
- Disconnect the headphones.
- Check that the speakers are connected correctly.
- Check if the stripped speaker wire is clamped
into the speaker terminal.
The left and right sound outputs are
reversed.
- Check the speaker connections and location.
The remote control does not function
properly.
- Select the source (CD orTUNER, for example)
before pressing the function button ( ► , N, ►!).
- Reduce the distance between the remote control
and the system.
- Insert the batteries with their polarities
(+/- signs) aligned as indicated.
- Replace the batteries.
- Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working. - Set the clock correctly.
- Press TIMER ON/OFF to switch on the timer.
- If a recording is in progress, stop the recording.
Not all lighted buttons are showing light. - Press DIM to select DIM OFF display mode.
The Clock/Timer setting is erased. - Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer
The system displays features
automatically and buttons start flashing.
- Press and hold DEMO STOP ■ on the system
to switch off the demonstration.
35