Philips FWI1000 - Manual (Page 29)

Tape Operation/Recording
Prepare the source to be recorded.
CD - load the disc(s).
TUNER - tune to the desired radio station.
TAPE - load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX - connect external equipment.
CONNECT - select a desired Internet Audio
station.
When recording is in progress
-> REC starts flashing.
It is not possible to change tape sides.
It is not possible to listen to another sources
except when dubbing tapes.
It is not possible to activate the timer function.
One Touch Recording
Press CD, TUNER, AUX or CONNECT to
select the source.
Start playback of the selected source.
Press RECORD to start recording.
To stop recording
• Press ■ on the system.
Note:
- One Touch Recording is not possible in TAPE
mode, "SELCIf 5[jijf?ir£I" will be displayed.
Dubbing Tapes
1 Load the prerecorded tape in tape deck 1.
• You can set the tape to the desired passage
where recording will start.
2 Press DUB (HSD) once for normal speed
dubbing or twice (within 2 seconds) for high
speed dubbing.
Playing and recording will start simultaneously.
-» "rJufPilRL" (normal speed) orTRSf" (high
speed) will be displayed, followed by "DLIS" with
an indication on the selected tape side direction.
H During high speed dubbing, the volume will
be reduced and hsd will appear on the display,
9 Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
To stop dubbing
• Press ■.
Notes:
- Only ~ mode is available during dubbing.
- Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
- To ensure good dubbing, use tapes of the same
length.
- You can listen to another source while dubbing.
CD Synchro Recording
1 Press CD 1 •2"3 to select the disc.
9 Press M or ►! (or Digits 0-9 on the remote
control) to select the desired track to start
recording.
9 You can program the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2 Press RECORD to start recording.
-> The disc will start playback automatically.
Digital Recording via Digital Out
For CD digital recording, please refer to the
instruction manuals for the CD recorder, digital
audio equipment and so forth.
To seiect another track during recording
1 Press PAUSE ► II to interrupt recording.
2 Press M or ►! (or Digits 0-9 on the remote
control) to select the desired track.
3 Press PLAY ►!! to resume recording.
To stop recording
9 Press ■.
-> Recording and disc playback will stop
simultaneously.
29