Connecting to internet audio, Select a desired category, band and station, To select a category – Philips FWI1000 User Manual
Page 18: To select a band, Press next/prev-band (or band, To select a station, Internet audio
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Internet Audio
"o
(O)
o o o o
® ® (D
@ © ®
@ ® ®
O ® O
©'
0
'©
“ 0 0 0
"o
©"© ©"©
Connecting to Internet Audio
• Press CONNECT to select the Internet Audio
source.
-> 'TfJiCPl'JCT' R
u
SI
lj
" will be displayed. A
few seconds later "I
m
PHUI
u
" and
"CHrJWEu f IfJG" will alternately appear on the
display until a connection is established.
The last selected CATEGORY LED will light
up.
-> When setting up a connection is in progress,
the INTERNET LED will start flashing.
If the connection fails within one minute, "f-iu
irjfLPfJLT CuWfJEEflLjrrwill be displayed
(refer to "Troubleshooting").
When the connection is established, the
system will begin the station data
transfer process
The INTERNET LED will continue flashing.
^ The display will show the last selected station
name and ‘SERPLRIffG".
-> If the station has been programmed as a
preset, the preset number will appear before the
station name.
If the data transfer fails, "GfRflijfJ fJIJT
FuLlfJIj" will be displayed. Press ►► to select
another station or try again later
When the station’s data is successfully
transferred
-» The INTERNET LED will light up.
The station name will be displayed.
STEREO
will appear on the display if the
system is tuned to a stereo station.
To exit the INTERNET connection
• Press STANDBY ON, ECO POWER or
TUNER
Notes:
- If you switch the system to CD,tAPE or AUX
mode, it will remain connected to INTERNET.
- If the line is busy,'
rnnr:rrTTni>i»,.,:ii u.
L. ui '
i
O
l
. J
m
X
ui
y will DC
displayed. Select another station or try again later.
Select a desired Category, Band
and Station
To select a category
Press CATEGORY repeatedly to select the
desired Internet Audio station list classified under
a category : GENRE, REGION or LANGUAGE.
^ The GATEGORY display panel will light up
with the selection.
-> The current STATION remains.
To select a band
Press NEXT/PREV-BAND (or BAND +/-
on the remote control) repeatedly to select the
next/previous BAND from the current
CATEGORY
-> The selected BAND and its first STATION
will be displayed, and then the system will begin
the station data transfer process.
To select a station
Press ►► or « (or STATION + / — on the
remote control) repeatedly to select the
next/previous STATION from the current BAND.
The selected STATION will be displayed, and
then the system will begin the station data
transfer process.
18