Philips FWI1000 - Manual (Page 14)

Basic Functions
©S' ®
SS'gjo
® ® @
®
® ©
@ ® ®
o
® o
0-^0
CE)
e ® e
0 0 ^ 0
o“ 0 e>©
oo~
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
• In Standby mode, press and hold DEMO
STOP ■ on the system until "UCMu ufJ" is
displayed.
-» The demonstration will begin.
To deactivate the demonstration
• Press and hold DEMO STOP ■ on the system
until "DTilu uFF" Is displayed.
-> The system will switch to Standby mode.
Notes:
— Even if you remove the AC power cord and
reconnect it to the wall socket the demonstration
will remain off until you activate it again.
- When the power is turned on, the disc tray may
open and close to initialize the system.
Easy Set
EASY SET allows you to store all available radio
stations automatically.
• In Standby or Demonstration mode, press and
hold STANDBY ON until "ERSB 5Ef" Is
displayed.
The system will search for all radio stations
on the FM band, then the AM band.
-> All available radio stations with sufficient signal
strength will be stored automatically.
-> The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
-> The last preset radio station will play when
EASY SET is completed.
Note:
- When EASY SET is used, all previously stored
radio stations will be replaced.
14