Philips FWI1000 - Manual (Page 15)

Basic Functions
Switching the system on
In Standby mode
• Press STANDBY ON, CONNECT or CD/
TUNER/TAPE/AUX on the system.
-> The system will switch to the last selected
source or the selected source.
9 Press any one of the DISC 1/2/3 buttons or
OPEN-CLOSE.
-» The system will switch to CD mode.
In Eco Power Standby mode
• Press CONNECT, CD 123, TUNER,
TAPE 1/2 or AUX/CDR on the remote
control.
-> The system will switch to the selected source.
Switching the system to Standby
mode
In Demonstration mode
• Press and hold DEMO STOP ■ on the
system.
In Eco Power Standby mode
• Press ECO POWER
In any other source mode
• Press STANDBY ON (or (|) on the remote
control).
The clock will appear on the display when the
system is in Standby mode.
Switching the system to Eco
Power Standby mode
• Press ECO POWER (or press and hold (!) on
the remote control).
-> "TCu PuWilR'' will be displayed, then the
display screen will go blank.
H The low power ECO POWER LED will be
lighted.
Note;
— /f you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power Standby or Standby mode.
Power Saving Automatic Standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.
Dim mode
You can select the desired brightness for the
display.
Press DIM repeatedly to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
■> DIM appears on the display, except for DIM
OFF mode.
DIM OFF - normal brightness with
Spectrum Analyzer On
DIM 1 - normal brightness with Spectrum
Analyzer Off
DIM 2 - half brightness with Spectrum
Analyzer On
<» WFi
DIM 3 - half brightness with Spectrum
Analyzer Off and all LEDs on the system
will be switched off.
'Si
15