Philips FWI1000 - Manual (Page 16)

Basic Functions
Volume Control
Adjust VOLUME to increase (turn knob
clockwise or press VOLUME +) or decrease
(turn knob counter-clockwise or press
VOLUME —) the sound level.
To listen through the headphones
Connect the headphones plug to the Ifil socket
at the front of the system.
-> The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
^ Playback will continue without sound and
“ mu TE" will be displayed.
To restore the volume, press MUTE again or
increase the VOLUME level.
Interactive Sound Control
For optimal sound listening, seiect oniy one
of the following interactive sound controls
at a time : PERSONAL, DSC, VEC or BASSI
TREBLE
Personal Sound
1
Press PERSONAL.
2
Adjust the JOG
CONTROL (or press
PER. on the remote
control repeatedly) to
select the desired Personal setting.
-> The selected Personal setting number will
appear on the display.
-> If no name has been stored previously,
''PERSIjfJRL t" will be displayed. is the
setting number
Personal Setting
You can use the JOG CONTROL to adjust the
Personal setting to your desired level. Up to six
Personal settings can be stored.
Press and hold PERSONAL on the system
until'SELEEf Pf?E5Ef WLIilSEf?" is displayed.
Adjust the JOG CONTROL to select the
desired Personal setting number and press ►►
on the system to confirm the selection.
-» "RjuRPf LEilJ EREH LEl'EL" will be
displayed.
3
Adjust the JOG CONTROL to select the
desired Spectrum Analyzer band level for low
frequency.
^ The level will increase or decrease
between + 3 and — 3.
4
Press
►►
to confirm the selection.
-»"RDRPT nii EPEG LEi'EL" will be
displayed, followed by "RDRPf HIGH EPEG
LEi'EL".
• Repeat steps 3-4 to select the desired middle
and high frequency Spectrum Analyzer band
levels.
5
You can edit the name for the personal setting.
The first character of the setting name will be
flashing.
6 Adjust the JOG CONTROL to select the
desired letter, number or symbol.
"R to Z", "u to 3" or"*, t, \, /,
7
Press
►►
to confirm the selection.
-» The next character for editing will flash.
• Repeat steps 6-7 to store up to 10 characters.
8 To store the setting, press PERSONAL on the
system again.
To change a setting before storing
• Press on the system to retrace the steps in
reverse order and make the changes accordingly.
To exit without storing the setting
• Press ■ on the system.
Notes:
- During personal setting, if no button is pressed
within 90 seconds, the system will exit the Personal
setting mode automatically.
- The wOOx level cannot be stored as part of the
Personal setting.
- When making a Personal setting, it is not
possible to adjust the Bass/Treble level, "G5E
3GG" will be displayed.
16