Cisco XR 12406 - Manual (Page 147)

4-17
Cisco XR 12406 Router Installation Guide
OL-13831-01
Chapter 4 Troubleshooting the Installation
Troubleshooting the Processor Subsystem
– There could be a false error indication originating from the RP
(
Table 4-4 ). Try reseating the RP. If that does not work you must replace
the RP.
Caution The RP reset switch resets the RP and the entire system. To prevent system errors
and problems, use it only at the direction of a Cisco-certified service
representative.
Table 4-4 RP Alphanumeric LED Messages
LED Display
1
Indications
2
LMEM
TEST
Low-memory test running
LCAH
INIT
Lower 15k cache initialization
BSS
INIT
Initialize main memory for ROM
NVRAM
INIT
Initialize NVRAM
EXPT
INIT
Initialize interrupt handlers
TLB
INIT
Initialize TLB
CACH
INIT
Initialize CPU data and instruction cache
CACH
PARY
Enable CPU cache parity
MEM
INIT
Initialize main memory
NVRAM
SIZE
Size of the NVRAM
PCMC
INIT
Initialize the PCMCIA