Juniper Systems Allegro CX and CE Bluetooth CF Card - Manual (Page 3)

Bluetooth Card Installation Instructions 3
Installing Bluetooth
Installing Bluetooth to an Allegro CE using
Windows CE .NET 4.1
The Bluetooth driver installer for an Allegro CE using the Windows
CE .NET 4.1 operating system is located on the Allegro CD shipped
with the Bluetooth card. To install these drivers, complete the
following steps:
Place the Allegro CD into your CD drive on your PC.
Open the CD and double-click on the Allegro CE using OS 4.1
folder.
Double-click on the BT_AllegroCE41.exe fi le.
Follow the installation instruction presented in the install
program.
Tap on Start|Programs|Utilities and tap on Reset System.
Tap on Start|Programs|Utilities and tap on Save System.
Once the drivers are installed, it is ok to insert the Bluetooth card
into the Allegro.
Installing Bluetooth to an Allegro CX without
Built-In Bluetooth
The Bluetooth driver installer for an Allegro CX without built-in
Bluetooth is located on the Allegro CD shipped with the Bluetooth
card. To install these drivers, complete the following steps:
Place the Allegro CD into your CD drive on your PC.
Open the CD and double-click on the Allegro CX without Built-in
Bluetooth folder.
Double-click on the BT_AllegroCX42.exe fi le.
Follow the installation instruction presented in the install
program.
Tap on Start|Programs|Utilities and tap on Reset System.
Tap on Start|Programs|Utilities and tap on Save System.
Once the drivers are installed, it is ok to insert the Bluetooth card
into the Allegro.
▲
1)
2)
3)
4)
5)
6)
▲
1)
2)
3)
4)
5)
6)