Juniper Systems Allegro MX User Guide - Manual (Page 48)

4
Field PC Owner’s Manual
Connecting to a Desktop Computer
Re-establishing an ActiveSync® Connection
To re-establish an ActiveSync ® connection, follow these steps:
Note: You can charge the unit while connected.
1. Plug USB client end (mini B) of the USB communications
cable into your Field PC.
2. Plug the USB host end (full size A) into your desktop
computer. ActiveSync ® automatically establishes a
connection between the Field PC and the desktop computer.
3. Follow the instructions on the desktop computer screen.
Note: Microsoft ActiveSync
® version 4.5 or later is required to
connect to the Field PC.
Re-establishing Windows Mobile ® Device Center Connection
Complete the following steps to reestablish a Windows Mobile ®
Device Center connection.
1. Plug the USB host (full sized A) into available port on the
desktop computer.
2. Plug the other end, USB client (mini B) into the Field PC.
Windows Mobile Device ® Center will automatically open.
3. Follow the steps on the screen.
Information for Software Developers
Information for software developers and programers can be
found at the Microsoft website. Information specific to the Field
PC can be located at the website www.junipersys.com.