Cyclades AlterPath BladeManager - Manual (Page 197)

Glossary
AlterPath Manager E2000 Manual Glossary-11
TACACS+ Terminal Access Controller Access Control System Plus. A
protocol that provides remote access authentication,
authorization, and related accounting and logging services,
used by Cisco Systems.
TCP Keep-Alive Interval The time interval between the periodic polling of all inactive
TCP/IP connections, checking that the client processes really
are still there. After a certain period of inactivity on an
established connection, the server's TCP/IP software will
begin to send test packets to the client, which must be
acknowledged. After a preset number of 'probe' packets has
been ignored by the client, the server assumes the worst and
the connection is closed.
The keepalive timer provides the capability to know if the
client's host has either crashed and is down or crashed and
rebooted.
Telnet A terminal emulation program for TCP/IP networks such as
the Internet. The Telnet program runs on your computer and
connects your PC to a server on the network. You can then
enter commands through the Telnet program and they will be
executed as if you were entering them directly on the server
console
Terminal Server A terminal server has one Ethernet LAN port and many
RS-232 serial ports. It is used to connect many terminals to
the network. Because they have the same physical interfaces,
terminal servers are sometimes used as console access
servers.
TTY 1. In Unix, refers to any terminal; sometimes used to refer to
the particular terminal controlling a given job (it is also the
name of a Unix command which outputs the name of the
current controlling terminal). 2. Also in Unix, any serial port,
whether or not the device connected to it is a terminal; so
called because under Unix such devices have names of the
form tty.