Cleveland Range HA-MKGL-80 - Manual (Page 42)

NOTE: Use thread sealant compatible with propane gas
on all threaded piping connections.
1. Disconnect electrical connection.
2. Shut off main gas supply and disconnect kettle from
supply line.
3. Remove TOP COVER.
4. Remove PLUG and SPRING.
5. Remove GAS ORIFICE and “O” RING.
6. Replace with new GAS ORIFICE and “O” RING.
7. Replace SPRING and PLUG.
8. Replace TOP COVER.
9. Place gas conversion label next to rating label.
10. Reconnect electrical supply.
Power Burner Gas Kettles
BTU's per Gas Water # of
Hour Type Column Orifices
KGL-40,
KGL-40-T,
140000 NAT 3.5 1
MKGL-40-T,
140000 LP 3.5 1
KGL-60 to 100,
KGL-60-T to 80-T,
KGL-40-TSH,
190000 NAT 3.5 1
KGL-40-F to 60-F, 190000 LP 3.5 1
KGL-40-SH to 60-SH,
HA-MKGL-60 to 100,
HA-MKGL-60 to 100-T
Conversion Parts Required
KGL-40
Part No. Description Quantity
KE95549 Conversion Label 1
KE54420-1 Air Intake Washer 1
KE53403-5 Gas Orifice 1
FA05002-29 “O” Ring 1
KGL-60 to 100
Part No. Description Quantity
KE95549 Conversion Label 1
KE54420-1 Air Intake Washer 1
KE53403-7 Gas Orifice 1
FA05002-29 “O” Ring 1
FIELD CONVERSION
INSTRUCTIONS -
Natural Gas to Propane Gas
PLUG
SPRING
GAS ORIFICE
“O” RING
TOP COVER