beautypg.com

Cleveland Range KDL-80-T User Manual

Cleveland, Quad-leg, direct steam, Direct steam kettles

background image

Cleveland

Project ________________________________

Item __________________________________

Quantity _______________________________

FCSI Section ____________________________

Approval _______________________________

Date __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: 1-216-481-4900

Fax: 1-216-481-3782

Web Site: www.ClevelandRange.com

Email: [email protected]

DIRECT STEAM KETTLES

Cleveland Standard Features

Kettle legs of 1

5

8

˝ OD, type 304 Stainless Steel, with 3 level

adjustable feet, with three-bolt flanges for floor bolting

Type 304 Stainless Steel construction, with #4 finish
on kettle and supports

Tilting Mechanism with permanently lubricated, self-locking,
Worm Drive of space saving design

50 psi Steam Jacket Rating on 80 - 100 gal. models,
35 psi Steam Jacket Rating on 125 - 150 gal. models

50 psi chrome plated Safety Valve on 80 - 100 gal. models,
35 psi chrome plated Safety Valve on 125 - 150 gal. models

High Capacity Pouring Lip

Condensate Drain Valve with insulated handle

Steam Control Valve mounted on console

Typical approvals include NSF and ASME

Options & Accessories

❐ Type 316 Stainless Steel Kettle Liner for high acid food

products (316)

❐ Lift-off Covers (CL)
❐ Steam Control Kit includes: Steam Trap, Condensate Strainer,

Check Valve, nipples and fittings, factory assembled and mount-
ed on kettle (SCK2)

❐ Spring-assisted, hinged, rotatable, domed Stainless Steel Cover

(CHS-)

❐ Hot and Cold Water Faucet, comes with Swing Spout (DPK)
❐ 2˝ or 3" diameter Tangent Draw-Off Valve (TD2 or TD3*), *TD3 will

raise height of kettle by 5-5/8" (143mm)

❐ 3" diameter Butterfly Valve (BV3)
❐ 100 psi Pressure Option (PO) (for 125 gallons and larger)
❐ Cooking Baskets and Tri-Basket Supports (BS and TBS)
❐ Pan Carrier (PCK)
❐ Measuring Strips (MS)
❐ Gallon Markings (KM)
❐ Kettle Accessory Kit (KAK) includes:

❐ Clean-up Brush (CB)

❐ 36˝ Kettle Paddle (KP)

❐ 36˝ Kettle Whip (KW)

❐ 36˝ Kettle Brush (KB)

❐ Draw-off Brush (DB)

❐ 24 oz. Ladle (KL)

❐ Swing Funnels for drain (SF)
❐ Faucet Mounting Bracket (FBKT)
❐ Pressure Reducing Valve for regulating incoming

steam pressure of over 45 psi (PRV-K)

Shall be CLEVELAND, Direct Steam Kettle, Quad-leg mounted,

Model KDL - _____ - T, _____ gallons, Tilting (hand or power) 2 3

Steam Jacketed. Type 304 Stainless Steel kettle and support legs.

50 psi Steam Jacket Rating on 80 - 100 gallon, 35 psi on125 gallon and

larger; Steam Control Valve; heavy re-enforced Rolled Rim. To oper-

ate, connect directly to a steam source supplying 10 to 45 psi

steam.

❐ Hot and cold, or cold only, Kettle Filler with 60˝

Hose (DKF-K or SKF-K)

❐ Automatic Water Cooling (AWC-1), requires Console Mounting

Option

❐ Alternate Mounting Systems - Console Mounting
❐ Automatic Water Meter (GMF or LMF)
❐ Water Meter Stand (SWM)
❐ Food Strainer (FS)
❐ Flow Diverter (FD)
❐ Drain Strainers (DS-)
❐ Pre-Rinse Spray Head and Hose (PRSK)
❐ Heat Deflector Shield (HS001)
❐ Correctional Packages

Short Form Specifications

Shown with optional Spring-Assisted Cover, 2" Tangent Draw-Off Valve

MODELS:

KDL-80-T

KDL-125-T

KDL-100-T

KDL-150-T

QUAD-LEG, DIRECT STEAM

TILTING, 2⁄3 STEAM JACKETED
80 or 100 GALLONS (300 or 375 LITERS)

SECT.

X

PAGE

11

0707

This manual is related to the following products: