Philips STU811 - Manual (Page 18)

OPERATION
I
PROGRAMME INSTALL
1 FIND PROGRAMMES
s AUDIO SETTINGS
3 EXT DECODER
4 PROGRAMME NUMBER 11
5 NAME vox
6 STORE PROGRAMME
When you enter the Delete Programme Menu, option 1 gives the number of the
programme you are viewing.
Select option 1 and use the + key or - key to alter the number if required.
Press the 2 key to confirm the deletion.
The message INFORMATION STORED appears briefly on the screen.
It is important to realise that you do not actuaily delete the programme, as there are
always 199 programmes. You are deleting the satellite channel information from a
particular programme number. This does not leave that programme number “empty";
all the channel information assigned to the subsequent programmes will effectively
be shifted along by one, as shown in the exampie. For this reason the deletion
process may take some time, and the handset will remain inoperable during this
period.
PROGRAMME INSTALL MENU
IMPORTANT:
• The Programme Install Menu is shown left. From this menu you can open up
various sub-menus, all of which are concerned with setting up individual pro­
grammes on your receiver. At this menu you can aiso name a programme or
change its name and you can copy channel information from one programme
number to another.
• When you enter the Programme Install Menu, the programme number shown at
option 4 is that of the programme you were viewing when you entered the menu.
• When your receiver is new, it has aiready been programmed with most of the
satellite channels. A separate list of preset programmes 1 to 199 is provided with
this manual.
• You will need to use the Programme Install Menu to tune in to and specify new
programmes, or to alter the existing settings on a per-programme basis. You may
wish to look up satellite transmission information in the current issue of a sateliite
TV magazine while you are using the Programme Install Menu and its sub-menus.
• In any of these menus, you can see the current programme number on the
receiver's front panei display.
STORING PROGRAMME INFORMATION
If you leave this menu or any of its sub-menus by pressing the MENU or OFF key, any
information you have changed wili be lost unless you store it first.
To store the information (against the programme number shown in option 4), press the
6 key at the Programme Install Menu. The message INFORMATION STORED will be
displayed briefly.
COPYING A PROGRAMME
You can copy the satellite channel information from one programme number to a
different programme number. The programme you are copying from remains the
same and the programme you are copying to is overwritten with the new information,
so that the two programme numbers end up containing the same satellite channel. All
other programmes remain unaffected.
In normal viewing mode, select the programme you wish to copy from, then press the
MENU key followed by the 7 key to display the Programme Install Menu.
Press the 4 key so that the programme number flashes and press the + key or - key
until the number of the programme you wish to copy
to is displayed.
If required, select option 5 and alter the programme name (as described below).
Press the 6 key to store the copy to its new programme number.
CHANGING A PROGRAMME NAME
If, when you entered the Programme Install Menu, the programme you were viewing
already had a name, this wili be shown in the menu. The name can be up to 6
characters long; it can contain spaces, but each space counts as one character.
Select option 5.
The first character of the name wiil flash, or there will be a flashing cursor at the position
for the first character.
Press the + key or - key to go through all the available characters, until the required
first character is displayed.
Deleting a Programme
J
16