Philips STU811 - Manual (Page 17)

J
Important;
• The Programme Edit Menu and its three sub-menus are shown right. You use
them to change the sateilite channei information assigned to each of the pro­
gramme numbers.
• You can also “copy” the channel information from one programme number to
another so that this new information overwrites any information which was on that
programme number. This is, however, done from the Programme Install Menu, as
described on page 16.
• It is important to take account of the fact that when the information is deleted or
inserted, the channel information “moves” to fill up the “empty” programme
numbers, as shown in the examples on the right (where example programmes 1
to 6 are listed). For each example, the starting point is the first list headed
STARTING POINT.
• Be careful before you delete a programme (i.e. delete the satellite channel
information from a programme number). If you later want to restore this pro­
gramme and do not have the same channel information on another programme
number (so that you can insert or copy it from there), you will have to set up the
programme again from scratch using the Programme Install Menu.
• As you change the programme numbers, the relevant programme will be dis­
played as the background to the menu (unless the programme is locked, in which
case the existing programme remains displayed).
Swapping Programmes
When you enter the Swap Programme Menu, option 1 gives the number of the
programme you are viewing and option 2 does not contain a programme number.
Select option 1 and use the + key or - key to alter the number if required.
Select option 2 and use the + key or - key to enter the number.
Press the 3 key to store this change.
The message INFORMATION STORED appears briefly on the screen.
If you were now to leave the menu and browse through the programmes you would
find that the satellite channel which was at one programme number is now at the other
programme number and vice versa, as shown in the example. All other programmes
remain unchanged.
if you remain in the menu after storing, the menu reverts to giving the original
programme number in option 1 and no programme number in option 2. You can then
perform further swaps if you wish before leaving the menu.
Inserting a Programme
When you enter the Insert Programme Menu, option 1 gives the number of the
programme you are viewing and option 2 does not contain a programme number.
Select option 1 and use the + key or - key to alter the number if required.
Select option 2 and use the + key or - key to enter the number.
Press the 3 key to store this change.
The message INFORMATION STORED appears briefly on the screen.
If you were now to leave the menu and browse through the programmes you will find
that the satellite channels assigned to several of the programme numbers will have
changed.
Consider the example shown right, where programme 2 is inserted at programme 5.
The satellite channel (SKY2) which was at programme 2 is now at programme 5. The
satellite channels at programme numbers 3 and 4 have also changed (effectively
shifted along by one programme number) with the result that the channel (SKY2)
which was at 2 is now after the channel (VOX) which was at 5. If, instead, programme
5 had been inserted at programme 2, VOX would be before SKY2 in the list. All
programme information before 2 and after 5 remains unchanged.
If you find that you have “miscalculated by one” when inserting programmes, you can
always use the SWAP option to rectify the problem.
If you remain in the menu after storing, the menu reverts to giving the original
programme number in option 1 and no programme number in option 2. You can then
perform further insertions if you wish before leaving the menu.
PROGRAMME EDIT MENU
OPERATION
J
PROGHAIVIME EOtT
1 SWAP PROGRAMME
Z INSERT PROGRAMME
3 DELETE PROGRAMME
SWAP PROGRAMME
1 SWAP PROGRAMME: 2
a WITH PROGRAMME: 5
3 STORE
INSERT PROGRAMME
1 INSERT PROGRAMME: 2
2 AT PROGRAMME: 5
3 STORE
DELETE PROGRAMME
1 DELETE PROGRAMME: 2
2 CONFIRM
If the STARTING POINT is always:
Prog No. Channel Info.
SKY1
SKY 2
ESPORT
MTV
VOX
SKY3
(
Swapping Prog. 2 with Prog. 5 gives:
Prog No.
1
2
3
4
5
6
Channel Info.
SKY1
VOX
ESPORT
Pi/TTV
SKY 2
SKY3
inserting Prog. 2 at Prog. 5 gives:
Prog No.
1
2
3
4
5
6
Channel Info.
SKY1
ESPORT
MTV
VOX
SKY 2
SKY3
Deleting Prog. 2 gives:
Prog No.
1
2
3
4
5
6
Channel Info.
SKY1
ESPORT
MTV
VOX
SKY3
FILMNT
(FILMNT was previously at Prog. 7)
15