Philips FW 795W/37 - Manual (Page 31)

TROUBLESHOOTING
General
System does not react when any button is pressed.
• Electrostatic discharge,
— Press STANDBY’ON to switch the system off.
Remove the AC power plug from the wall outlet then
reconnect and switch on the system again.
No or poor sound.
• Volume is not turned up.
— Adjust VOLUME.
• The headphones are connected.
— Disconnect the headphones.
• Speakers are not connected or are connected wrongly.
— Check that the speakers are connected correctly.
Make sure that the stripped speaker wire is clamped.
Reversed left and right sound.
• Speakers are incorrectly connected.
Check the speaker connections and location.
Lack of bass sound or apparently imprecise
physical location of musical instruments.
• Speakers are incorrectly connected.
Check the speaker connection for proper phasing, red/
black wires to red/black terminals.
Remote control has no effect on the system.
• Wrong source is selected.
— Select the source (CD, TUNER, etc.) before pressing
the function button (PLAY, PREV/NEXT, etc.).
• The distance to the system is too large.
Reduce the distance.
• Batteries are inserted incorrectly.
— Insert the batteries with their polarities (+/- signs) as
indicated.
• Batteries are exhausted.
— Replace the batteries.
Timer not working.
• Timer is not switched on.
^ Press CLOCK* TIMER on the system to switch on the
timer.
• Dubbing/recording is in progress.
— Stop dubbing/recording.
System display features automatically and buttons
flashing continuously.
• Demonstration mode is switched on.
Press and hold STOP ■ for 3 seconds to switch off
the demonstration mode.
U l ' i r L U Q ] l L r i . U I
WrPTlPMnr,l,lcq " is displayed.
Headphones is connected.
Disconnect the headphones.