Philips FW 795W/37 - Manual (Page 24)

TAPE
f
Loading a tape
Press OPEN.
The tape deck door opens.
Load the tape with the open
side downward and the full
spool to the left.
Close the tape deck door.
Tape Playback * •
1 Press TAPE to select TAPE mode.
— "TRPC l"or"TRPC P" will be displayed.
• Press TAPE again to select either tape deck 1 or tape
deck 2.
2 Load the tape into the desired tape deck.
3 Press PLAY ► to start playback.
3a (For Tape Deck 2 only!
Press SIDE A«B to switch playback between sides A
and B.
^The ◄ or ► (back or front) flag appears on the
display, depending on the side selected.
3b (For Tape Deck 2 only)
Press REVERSE MODE to select the different type of
playback mode (see auto reverse playback!.
4 Press STOP ■ to end playback.
Notes:
- To change side before playback begins, use the SIDE
button on the remote control.
- When the tape has stopped playing, the system will
switch to the standby mode automatically after 15
minutes if no button is pressed.
24