Operating the system – Philips FW 795W/37 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Important:
Before you begin operating the system, complete
the preparation procedures.
Demonstration mode____________________
The system has a demonstration mode that shows the
various features offered by the system. Whenever the
system is switched on from the wall socket, the
demonstration mode will start automatically.
Notes:
- During demonstration mode, if you press any source
(or standby-on) button, the system will switch to the
respective (or standby) mode.
- When the system is switched to standby mode, 5
seconds later, the demonstration mode will begin
again.
To cancel demonstration mode
• Press and hold
STOP
■
(on the system
on/yjfor 3
seconds
to
stop the demonstration.
The demonstration mode will be switched off
permanently.
Easy Set
(only in Standby or Demonstration mode)
EASY SET allows you to store all available radio stations
In a particular band (FM»AM) automatically (see Easy
Set under TUNER section).
OPERATING THE SYSTEM
Switching the system ON ____________
• Press
STANDBY«ON (on the system only), CD,
TUNER, TAPE
or
AUX
You can also switch on the system by pressing any one of
the 3 CD DIRECT PLAY buttons.
Switching the system to standby mode
• Press
STANDBY*ON
again.
Selecting the Source________
• Press the respective source selection button;
CD,
TUNER, TAPE
or
AUX
The display Indicates the selected source.
Note:
- For an external source, make sure you have connected
the audio left and right OUT terminals of the external
equipment (TV, VCH, Laser Disc or DVD player) to the
AUX IN terminals.
I