Loading the cd changer – Philips FW 795W/37 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD
Warning!
1) This system is designed for conventional CDs.
Do not use any accessories like disc stabilizer
rings or CD treatment sheets, etc., which may
damage the CD mechanism.
2} Do not load more than one disc into each tray.
3) When the CD changer is loaded with CD(s), do
not turn over or shake the system. This may jam
the changer.
You can load up to three discs in the CD changer
for continuous playback without interruption.
Loading the CD Changer____________ __
1
Press
CD
to select CD mode.
2
Press
0PEN»CL0SE
— The CD compartment slides out.
3
Load a CD with the printed side up in the right tray.
• You can load another disc in the left tray.
• To load the third disc, press
DISC CHANGE.
The CD changer carousel will rotate until the empty
tray is at the right hand side and is ready for
loading.
— Playback will always start with the disc in the outer
right disc tray.
4
Press
0PEN*CL0SE
to close the CD compartment.
— The total number of tracks and playing time of the
last selected disc appear on the display.
1
19