Philips FW 795W/37 - Manual (Page 13)

Controls on the system and remote
control______________
on STANDBY*ON
- to switch the system on or to standby mode.
- to store radio stations automatically by pressing
and holding for 2 seconds (only in Standby or
Demonstration mode).
\2\ RECORD
- to start recording on tape deck 2 only.
[1 REVERSE MODE
- to select the different playback mode on tape deck
2 only.
5] CLOCK»TIMER
- to view clock, set clock or timer.
[s] SOURCE: to select the following
CD(CD1»2»3) ........... to select CD mode. When in
CD stop mode; to select the
respective disc tray.
TUNER (BAND) ..........to select Tuner mode. When
in Tuner mode; to select the
waveband: FM or AM.
TAPE (TAPE 1*2) to select Tape mode. When
tape in stop mode; to select
either tape deck 1 or 2.
AUX (VIDEO)....... ... to select external source (e.g.
DVD, TV, Laser Disc or VCR
sound).
m DISPLAY
- to view the current setting of the system.
U] CD CAROUSELTRAY
[1] 3 CD DIRECT PLAY
- to select a CD tray for playback.
0 DISC CHANGE
- to change CD(s).
OPEN*CLOSE
- to open or close the CD carousel tray.
DYNAMIC BASS BOOST (DBB)
- to select bass boost level (Beat, Punch, Blast).
DIGITAL SOUND CONTROL DISPLAY PANEL
- to view the selected DSC setting.
DIGITAL SOUND CONTROL (DSC)
- to select the desired sound effect; OPTIMAL,
JAZZ, CLASSIC, ROCK or TECHNO.
I
INCREDIBLE SURROUND
- to switch on or off the surround sound effect.
] DOLBY PRO LOGIC (DPL)
- to select the desired Dolby Pro Logic mode : DOLBY
SURROUND, CENTER PHANTOM, DOLBY 3 STEREO
or STEREO.
i| PROGRAM
- to program CD tracks in CD mode or preset radio
stations in tuner mode.
i| VOLUME
- to adjust the volume level.
I HEADPHONES /Ti
- to connect headphones jack,
i DUBBING
- to dub a tape in normal or high speed.
5| MODE SELECTION
SEARCH ►► TUNING ►>)
for CD................to search backward/forward.
for TUNER..........to tune to a lower or higher radio
frequency.
for TAPE............ to rewind or fast forward on tape
deck 2 only.
CONTROLS
STOP ■ (CLEAR)
for CD................to stop CD playback or clear a
program.
for TUNER..........to stop programming.
for TAPE............ to stop playback or recording.
PLAY ► / PAUSE II (SIDEA«B)
for CO................to start or interrupt playback.
for TAPE............ to start playback; When playing in
tape 2 mode, to change side.
PREV M / NEXT W (T PRESET A)
for CD................to skip to the beginning of the
current or previous/next track.
for TUNER.......... to select a preset radio station in
memory.
i OPEN
- to open tape deck 2.
i] TAPE DECK 2
I
TAPE DECK 1
^ OPEN
- to open tape deckl.
I REPEAT
- to repeat a CD track,
i SHUFFLE
- to play all the available discs and their tracks in
random order.
^ TEST TONE
- to check the sound level for Front Left, Front Right,
Center and Surround speakers respectively.
i MUTE
- to switch off the sound temporarily or to switch on
again.