Dolby pro logic, Dolby center phantom, Dolby 3 stereo – Philips FW 795W/37 User Manual
Page 16: Normal stereo, Fdolby pro logic
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

f
DOLBY PRO LOGIC
Dolby Center Phantom
Dolby 3 Stereo
This setting is for use without the center speaker, it
redistributes the center channel information to the left
and right speakers providing conventional stereo across
the front.
This setting is for use where full surround is not required,
but a wide stereo sound is desirable. It only requires the
left, right and center speakers.
..ahii'T-“'.
Press
DPL
PHANTOM
to
select Dolby Pro Logic
Center Phantom mode.
— The message TETWTEf?
PHRfjTlJi'l"
will be
- i
Press
DPL
357HffOto select Dolby 3 Stereo mode.
— The message "JjuL^R 3
will be
displayed.
displayed.
Normal Stereo
This setting is for normal stereo sound without Dolby Pro
Logic. It only requires the left and right speakers.
Press
DPL
to select Stereo mode.
■ The message "f
will be displayed.
Note:
- When in DPL mode, pressing the
respective DPL button on the
system again (until the button is
not lighted! will switch to normal
stereo mode.
Important!
1. To listen to the optimum Dolby Pro Logic sound effect,
it is recommended to switch on DPL in combination
with "Classic" and without Incredible Surround.
2. It is recommended to switch off Dolby Pro Logic when
you do recording on a tape.