Philips FW 795W/37 - Manual (Page 25)

/Vuto Reverse Playback lonly on tape deck 2)
• Press REVERSE MODE to select the different
playback modes.
................... recording or playback on one side of
^ the tape. The tape stops at the end
of one side.
................. recording or playback on both sides
—of the tape. The tape then stops.
............... continuous playback on both sides
" "
of the tape up to a maximum of 20
times per side unless you press
STOP ■
Rewind/Fast Forward ¡only on tape deck 2)
At the stop mode
1 You can rewind or fast forward the tape by pressing
or ►► respectively.
- "«(or »>" will be displayed depending on which
button is pressed.
— The tape will stop automatically at the end of the
rewinding or fast forwarding.
2 Press STOP ■ to stop rewind or fast forward.
Outing playback
. Press and hold ■*< or ►► respectively until the desired
passage is located.
- During searching, the sound is reduced to a low
volume.
— When you release ■<◄ or the tape continues
playing.
AUX
Notes:
- During rewinding or fast forwarding of a tape, it is
possible to select another source (e.g. CD, TUNER or
AUX mode).
- Check and tighten slack tape with a penal before use.
Slack tape may get jammed or may burst in the
mechanism. . . t ,
- C-120 tape is extremely thin and is easily deformed or
damaged, it is not racommendad for use in this
system.
- Store the tapes at room temperature and do not put
them too close to a magnetic field Ifor example, a
transformer, Td or loudspeaker boxes). Selecting External Equipment_____________
If you have connected the audio out terminals of the
external equipment (TV, VCR, Laser Disc or DVD player) to
the AUX IN terminals, you can hear the sound from the
system.
• Press AUX to select the external mode.
— "RUX" will be displayed.
Note:
- All the sound control features (e.g. DSC, DBB, etc.) are
available for selection.
25