Tuner, Tuning to preset radio stations – Philips FW 795W/37 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TUNER
Manual programming
1
Press
TUNER
2
Press
TUNER (BAND)
to select the desired
waveband: FM or AM.
3
Press
PROGRAM
for less than one second.
PROGRAM flag, the frequency and preset station
number start flashing.
— The next available preset number will be displayed
for selection.
4
Press
TUNING
or
►►
to tune to the desired
frequency.
• When all 40 presets are stored, no preset number is
shown.
— The message “PRGGITR
m
T
u
LL" will be
displayed.
• If you wish to store the radio station to another preset
number, press
PRESET
▼
or
A.
to select the desired
preset number.
5
Press
PROGRAM
again.
— PROGRAM flag will stop flashing, and the radio
station will be stored.
• Repeat the above procedure to store other preset radio
stations.
Notes:
- Y o u can cancel the manual programming by pressing
STOP m.
- During programming, if no button is pressed within 20
seconds, the system will exit program mode
automatically.
Tuning to Preset Radio Stations_________
• Press
PRESET
▼ or
A
to select the desired preset
number.
^ The preset number, frequency and waveband
appear on the display.
I
23