Automatic playback, Automatic rewind, eject, off, Memory rewind, power off – Philips CCZ194AT User Manual
Page 53: Tape eject, Automatic tracking adjustment, Manual tracking, Automatic operation features s3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Operation Features S3
The following playback features will always operate.
Automatic Playback
When you put a tape in the TV/VCR, the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. If a timer recording is set, the power will not come on auto
matically when you insert a tape with the record tab intact. If a
timer recording is set and the VCR power is off, the TV/VCR will
eject the tape if the record tab is missing.
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the
TV/VCR will rewind the tape, stop, turn itself off, and eject the
tape. If a real-time counter memory is set, the TV/VCR will only
rewind the tape to the point at which the counter was set to zero,
then stop. The TV/VCR will not turn itself off or eject the tape.
Memory Rewind, Power Off
When the POWER button is pressed while the TV/VCR is rewind
ing a tape, REW POWER OFF will appear on-screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real-time counter memory is set, the TV/VCR may only rewind
the tape to the point at which the counter was set to zero, then
turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR automatically adjusts the tracking to give you the
best possible picture quality. With some recordings, however, you
may get a better picture using the manual tracking controls (see
below).
Manual Tracking
To adjust the tracking manually during tape playback, press the
CHANNEL buttons on the TV/VCR or the TRACKING
A./V buttons on the remote control.
Tracking returns to Automatic Tracking Adjustment when a tape is
inserted or when the STOP/^ button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment