Checking or clearing timer recordings – Philips CCZ194AT User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
38 Timer Recording (confd)
Checking or Clearing Timer Recordings
With theTV/VCR on, press the COMBI button, then press
the MENU button.
2
Press the PLAY/A button or the STOP/T button to select
VCR PROGRAM, then press the F.FWD/^ button.
3
Press the PLAY/A button or the STOP/V to select PRO
GRAM REVIEW, then press the F.FWD/^ button.
The
timer recording information for the program in the lowest num
bered position will appear on-screen. If no timer recordings are
programmed, nothing will happen when you select PROGRAM
REVIEW.
4
Press the F.FWD/^ button to display information about
the next programmed timer recording.
(If you do not press
a button within 10 seconds, information about the next pro
grammed timer recording will appear.) This will continue until all
positions have been displayed.Then, the menu will disappear.You
can exit the Program Review at any time by pressing the STA-
TUS/EXIT button.
C
Mr
To cancel the timer recording displayed, press the CLEAR
button.
Either the display will disappear or information about
other timer recordings will appear. If you do not press any other
buttons, the display will disappear after all timer recordings have
been displayed.
2-3
4
5
6
Repeat steps I - 4 to make sure you have cleared the
correct position.