Philips CCZ194AT - Manual (Page 49)

A - B Repeat Play 49
Follow the steps below to program theTV/VCR to play the mater­
ial between two specified points (A and B) on a tape over and
over again.
I
Insert a tape in the TVAfCR.
2
Press the COMBI button, then press the MENU button.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS ►
3
Press the PLAY/A button or the STOP/T button to select
VCR SETUP, then press the F.FWD/^ button.
VCR SETUP
> ONETIME PLAY [ON]
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
VCR PLUS+ REF. MAP
SELECT A T CHOOSE ►
TO END PRESS EXIT
4
Press the PLAY/A button or the STOP/T button to select
REPEAT PLAY.
VCR SETUP
ONETIME PLAY [ON]
> REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
VCR PLUS+ REF. MAP
SELECT A T CHOOSE ►
TO END PRESS EXIT
5
Press the F.FWD/^ button repeatedly so that A-B
appears beside REPEAT PLAY.
VCR SETUP
ONETIME PLAY
> REPEAT PLAY [A-B]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
VCR PLUS+ REF. MAP
SELECT AT CHOOSE ►
TO END PRESS EXIT
Instructions continue on page 50«
I
Insert a tape in the TV/VCR.
3-4
5
Helpful H ints
To cancel A-B Repeat Play, set ONE
TIME PLAY to ON.To set ONETIME
PLAY to ON, follow steps I - 3
above.Then, press the PLAYI^ but­
ton or the STOPt^ button to select
ONETIME PLAY. Press the
EFWDI^ button so that ON
appears beside ONE TIME PLAY.
Then, press the STATUSIEXIT but­
ton.
The end position (B) must be later
on the tape than the start position
(A).