Philips CCZ194AT - Manual (Page 15)

5
Press the PLAY/A button or the STOP/V button to select
SET PBS CH. AUTO.Then, press the F.FWD/^ button.
Setting the Clock (confd) 15
6 Wait for the TV/VCR to find
the time.
'SET AUTO CLOCK
TIME —
DATE
NOW SEARCHING
TO END PRESS EXIT
6
NOW SEARCHING flashes on the TV/VCR screen.
However, you may see the message: “PLEASE TURN OFF TO SET
AUTO CLOCK PLEASE WAIT SEVERAL MINUTES.” If this mes­
sage appears, turn off the TV/VCR for a few minutes. When you
turn on the TV/VCR, the time will be set If the time is not set
repeat steps I - 5. Or, follow the steps on pages 12 - 13 to set the
clock manually or pages 16 - 17 to set the clock with Manual PBS
Channel Selection.
7
When theTVAfCR finds the PBS channel» the time will
appear on-screen. Press the STATUS/EXIT button.
'SET AUTO CLOCK
TIME
DATE
06:30 PM
07/01 /98
WEDNESDAY
TO END PRESS EXIT
e If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen» you will be prompted to turn off the
TV/VCR.Turn off the TV/VCR,
Leave it off for several min­
utes. When you turn on the TV/VCR again, the clock will be set.
'SET AUTO CLOCK
TIME
DATE --/ — /--
CANNOT FIND CLOCK DATA
TO END PRESS EXIT
5
Helpful H ints
To display the time, press the STA­
TUS/EXIT button. A status display,
which includes the time, will appear
on the TV/VCR screen. Details are
on page 29.
You must turn off the TV/VCR for
several minutes during automatic
clock setting. If the clock is not set
when you turn on the TV/VCR,
repeat the steps for Automatic PBS
Channel Selection. If the clock still is
not set, set the clock manually.
You cannot use the AUTO CLOCK
feature if you don’t receive a PBS
channel that carries a time signal in
your area. Set the clock manually.