Philips CCZ194AT - Manual (Page 51)

Real-Time Counter Memory 51
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
I
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button.
The real-time counter will
appear on-screen.
'01:08 PM STOP
CHIO
SLP 1 : 2 3 : 4 5
3
While the counter remains on-screen, press the CLEAR
button to reset the real-time counter to zero.
4
While the counter remains on-screen, press the MEMORY
button so that M appears on-screen.
To erase a real-time
counter memory, press the MEMORY button so that the M disap­
pears from the screen.
CD CD CD
CD CD CD
CD CD CD
CD CD
__ o
((- .....o o
TRACKING
SEARCH SEARCH
PHILIPS i .'.« h !> aim : i
5
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/-^ button or the
F.FWD/^ button when playback is stopped.When the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the
PLAYZ- a . button to
watch the tape.
Helpful H ints
The real-tíme counter memory will
not function during Repeat Play
mode. Details are on page 48.
You may only set one real-time
counter memory at a time. If you
try to set the real-time counter to
zero at a second location, the previ­
ous real-time counter to zero setting
will be lost.