Philips CCZ194AT - Manual (Page 37)

Timer Recording (contad) 37
8
Press the Number I button to record in SP speed, press
the Number 2 button to record in LP speed, or press the
Number 3 button to record in SLP speed.
Details about tape
speed are on page 32. You cannot use the SPEED button at this
time.
'^ONETIME PROGRAM
PROGRAM I
CHANNEL
TIME ON
TIME OFF
REC SPEED SLP
SP=I LP=2 SLP=3
10
09:30 PM
11:00 PM
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
9
Press two Number buttons for the month and two
Number buttons for the day you want the program to
record.
For example, for July
10, 1998,
press
07,
lO.The day of
the week and the year will be displayed automatically. (You cannot
program theTV/VCR to record more than one year in advance.)
/O netime program
PROGRAM 1
CHANNEL
TIME ON
TIME OFF
REC SPEED
START DATE 07/10/98
FRIDAY
10
09:30 PM
11:00 PM
SLP
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
1 0
1 1
9
Press the STATUS/EXIT button.
PROGRAM WAS COM­
PLETED PLEASE TURN OFF FOR TIMER RECORDING will
appear on-screen.
• If there is not a tape in the TV/VCR, PLEASE INSERT CASSETTE
also appears on-screen.
• If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on-screen. If this happens,
insert a different tape.
• If PROGRAM NOT COMPLETED appears, start again at step I.
TheTV/VCR must be
off for a timer record­
ing! Make sure there is
a tape in theTV/VCR.
Turn off theTV/VCR power.
The REC(ord) light will flash. If you
forget to turn off theTV/VCR, PLEASE TURN OFF FOR TIMER
RECORDING appears on theTV/VCR screen two minutes before
a timer recording starts.
Helpful H ints
PROGRAM NOT COMPLETED /
CLASH may appear on-screen when
you finish setting a timer recording.
This means that the timer recording
you just programmed and another
timer recording overlap, and thus
the current timer recording will not
be carried out.
To stop a started timer recording,
press the STOPIEJECT button on
the TV/VCR.
Please see page 56 for more
Helpful Hints.