Philips CCZ194AT - Manual (Page 32)

32 Recording
Read and follow the steps below to record a TV program.
I
Press the COMBI button, then place a tape with its record
tab intact (see page five) in theTVA^CR.The
power will
come on.
Or, if the tape is aiready in theTV/VCR, press the
POWER button to turn on theTV/VCR.
2
Press the SPEED button untii the desired tape speed
appears on the TV/VCR screen.
Details about tape speed are
given below.
3
Use the CH(annei). Up/Down buttons or the Number but­
tons to seiect the channei to be recorded.
(Channels cannot
be changed during recording.)
4
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will glow.
# If there is not a tape in theTV/VCR, NO CASSETTE flashes on­
screen briefly.
• If the tape does not have a record tab, PROTECTED CASSETTE
CANNOT RECORD flashes on-screen briefly.The TV/VCR will
eject the tape. Insert another tape.
5
To pause the recording (for exampie, during commer­
cials), press the PAUSE/STILL button.
The REC(ord) light will
flash.
To resume recording, press the PAUSE/STILL button
again or the REC(ord)/OTR button.
The REC(ord) light will
glow.
To stop recording, press the STOP/V button.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (TI60,TI20, andT60).There are three playback
speeds: SP, LP, and SLR During playback, the VCR selects the tape
speed automatically. When recording, you can change the tape
speed using the SPEED button (see page 24).
Tape Speed Maximum Record/PlaybackTime
Type TI60 TI20 T60
SP
(Standard Play)
2 hrs.
40 mins.
2 hrs. 1 hr.
LP
(Long Play)
5 hrs.
20 mins.
4 hrs. 2 hrs.
SLP
(Super Long Play)
8 hrs. 6 hrs. 3 hrs.
2
I
SLEEP SP to MEMOav
CIS
..
5
CD CD G3
CD CD CD
CD CD CD-
PHiuPS lawi’Kt
3
Helpful H ints
You cannot record one channel while
watching another.
Recording options are on pages 33
- 4 3 .
You cannot record if DEFEAT
RECORDING is set to ON. (REC
DEFEATED will flash on-screen.)
Details are on page 43.
If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cassette tape
from damage.
You can change the tape speed with
the SPEED button while a recording
is in progress, but some distortion
may appear on the tape.