Philips CCZ194AT User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
34
Rerecording (Tape Duplication)
I
Make the connections shown above, using audio and video
cables. (Make sure the source unit is connected to a
power source.)
The source unit (VCR or camcorder) will play your tape.
Insert a
prerecorded tape in the source unit.
If playback begins, press
the STOP button on the unit.
3
TheTV/VCR will record your tape.
Insert a blank tape in the
TV/VCR.
Make sure the tape’s record tab is intact.TheTV/VCR
power will turn on automatically.
4
Point the TV/VCR remote control at the TV/VCR. Press
the COMBI button, then press Number buttons 0,0 so
that A/V IN appears on-screen.
5
Point the TV/VCR remote control at the TV/VCR. Press
the SPEED button until the desired tape speed (SP, LP, or
SLP) appears on-screen.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit (VCR or
camcorder).
Helpful H ints
Unauthorized recording of copy
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
Different brands of equipment may
operate differently.
Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
Audio and video cables are not
included.