Philips CCZ194AT - Manual (Page 52)

52 Index Search
This feature allows you to index the starting points of programs
that you have recorded on a tape.Then, you can easily rewind or
fast forward to that point.
Example:
If you are watching program number 4 and you want to fast for­
ward to program number 7, skip three programs.
CURRENT PLAYBACK PROGRAM
Beginning of tape End of tape
Pro. i Pro. 2 Pro.3 Pro. 4 Pro. 5 Pro. 6 Pro. 7
p^4 3
INDEX MARK
1 )
I
Press the COMBI button» then press the INDEX SEARCH
button to bring up the index search display.
There must be
a tape in theTV/VCR.
INDEX SEARCH
00
ENTER INDEX NUMBER
2
Within 10 seconds, use the Number buttons to enter the
number of programs that you want to skip.
For example, to
skip three programs, press Number buttons 0,3. If you do not
make an entry within 10 seconds, theTVA/CR will exit Index
Search mode.
3
Within 10 seconds, press the F.FWD/^ button or the
REW(ind)/^ button to skip forward or backward.
The
TV/VCR will fast forward or rewind to the beginning of the
desired program, then begin playback. (The program numbers
count down on-screen as the searching progresses.To remove the
on-screen counter, press the INDEX SEARCH button once.)
CD E] CB
■ Q O CD
CD 10 0
CD G3 CD
Helpful H ints
• Every time an index mark is
skipped, the number of programs
decreases by one.
• Up to 20 index marks may be
searched.
• This function will not operate in
recording mode.
• Press the STOP button to stop the
search.
• An index mark will be made auto­
matically when the REC(ord)/OTR
button is pressed, or at the begin­
ning of a Timer Recording or OTR.
• The index mark is not made if the
PAUSE/STILL button is pressed and
released during recording.
• The time gap between index marks
should be greater than I minute for
SP recording, 2 minutes for LP
recording, and 3 minutes for SLP
recording.