Remote to, Setting the, Operate a cable boxidbs (contv) 21 – Philips CCZ194AT User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the
Remote to
Operate a Cable BoxIDBS (contV) 21
5
within 30 seconds, press the Number buttons to enter
the two-digit code for your Cable Box/DBS. For example, If
you have a Zenith Cable Box, press Number buttons 2,3.
6
Repeat step I. If the remote control works your Cable
Box/DBS, you're finished. If the remote control still doesn't work
your Cable Box/DBS, repeat steps 2 - 5, using a different code, for
your brand. If available.
6
^JkUL
MSMOTY
CD
CD CD
iTMuaemT
I
>
CD CD CD
Q CD CD
CD CD CD
|['»'
ch
1| t 0 1
1^1
PHiupi mssui
5
There is no guarantee
that the remote control
will work your Cable
Box or DBS.
Helpful H ints
Although the remote control that
comes with your TV/VCR will work
most Cable Boxes and DBSs, it is
possible that the remote control will
not operate your Cable Box or DBS.
The remote control may only oper
ate some features of your Cable
Box or DBS. For example, some
Cable Boxes may only be turned on
at the Cable Box, therefore the
remote control will not be able to
turn on the Cable Box.
If you can not change the channels
‘-'at
the Cable Box by using the
Number buttons, press the
CABLE/DBS button before you press
the Number buttons. It may change
channels at the Cable Box.
If you had to program the remote
control to operate your Cable Box or
DBS here, whenever you replace the
batteries in the remote control, you
wilt have to program the remote
control again.