Philips CCZ194AT - Manual (Page 3)

Introduction 3
Welcome to yourTV/VCR owner’s manual.
This manual has six sections: Setting Up YourTV/VCR; Description of Controls; Basic Operations; Recording
Options; Playing Options; and Information You May Need. The instructions explain all of the TV/VCR’s fea­
tures, which are listed below.
Features
A-B Repeat Play
Automatic Channel Setup
Automatic Operation Features
Automatic Tracking Adjustment
Closed Caption
Daylight-Saving Time
High Quality (HQ) System
Index Search
On-Screen displays in English or Spanish
On-Screen Menu Programming, accessible with remote control or front panel but­
tons
One-Touch Recording
Real-Time Counter
Remote Control with capability to operate a Cable Box or Direct Broadcast System
Remote Locator
Repeat Play
Skip Search
Sleep Timer
SmartClock™
Smart Picture
Special Effects Playback: Forward and Reverse Searching: Still;Variable Slow; Frame
Advance
Timer Recording
VCR Plus+ Programming System
Safety Precautions
Warning:To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
FCC Warning: Any unauthorized changes or modifications to this equipment void the
user’s authority to operate it.
This device complies with part 15 of the FCC Rules. Operation is subject to the follow­
ing two conditions: ( I ) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
ThisTV/VCR, equipped with a High Quality (HQ) system, is compatible with existing
Video Home System (VHS) equipment.
Philips Consumer Electronics Company
recommends that you use only video cas­
sette tapes that have been tested and inspected for use in two, four, six, and eight hour
VCRs, and which are labeled with the
IVHSI
mark. The use of tapes that have not been
inspected for use in two, four, six, and eight hour VCRs may result in poor picture quality
and excessive deposits on the video heads, which may not be covered by the warranty if
damage occurs.
Note to the Cable TV System Installer: This reminder is provided to call the
Cable TV system installer’s attention to Article 820-40 of the National Electrical Code,
which provides guidelines for proper grounding - in particular, specifying that the cable
ground shall be connected to the grounding system of the building, as close to the
point of cable entry as possible.
SmartClock™ is a trademark of Philips Consumer Electronics Company.
Copyright 1998 Philips Consumer Electronics Company. All rights reserved.