IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 72)

63
Figure 4-70
4.2.5.5.7 Auto Register
The auto register function allows you to access a device in the LAN. You need to input server
IP, port so that the device can register to the server. See Figure 4-71.
Figure 4-71
4.2.5.6 Alarm
Before operation, please make sure you have properly connected alarm devices such as
buzzer.
In the main menu, from Setting to Alarm, you can see alarm setup interface. See Figure 4-72.
z
Alarm in: Here is for you to select alarm channel number.
z Event type: There are two types. One is local input and the other is network input.
z Type: normal open or normal close.
z Period: Click set button, you can see an interface is shown as in Figure 4-74. Here you can
set for business day and non-business day. In Figure 4-74, click set button, you can see an
interface is shown as in Figure 4-75. Here you can set your own setup for business day and
non-business day.
z Alarm output: Here you can set alarm output port (Multiple choices). System can activate
corresponding alarm output device(s) when an alarm occurs.