IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 30)

21
Figure 4-5
The other ways is to press power button on the front panel for at least 3 seconds, system will
stop all operations. Then you can click the power button in the rear panel to turn off the NVR.
4.1.4 Auto Resume after Power Failure
The system can automatically backup video and resume previous working status after power
failure.
4.1.5 Replace Button Battery
Please make sure to use the same battery model if possible.
We recommend replace battery regularly (such as one-year) to guarantee system time
accuracy.
Note:
Before replacement, please save the system setup, otherwise, you may lose the data
completely!
4.1.6 Live Viewing
After you logged in, the system is in live viewing mode. You can see system date, time and
channel name. If you want to change system date and time, you can refer to general settings
(Main Menu->Setting->General). If you want to modify the channel name, please refer to the
display settings (Main Menu->Setting->Display). You can view there is a volume bar at the
right bottom corner. The volume bar becomes red when it is the max value. It is the mixed
audio volume when system is in PIP mode.
Right click mouse, you can see system pops up the following menu. See Figure 4-6.
Please refer to the following sheet for detailed information.
Name Function
View 1
System displays in one-channel. You can select channel 1 to
channel 4.
View 4 System displays in 4-window.
View PIP
System displays in picture in picture mode. One picture is big
and one picture is small.
Pan/Tilt/Zoom Set PTZ parameter and realize fast positioning.
Auto focus
Click it to adjust auto focus distance.
Color Setting
Set video hue, brightness, contrast, saturation and gain.
Please note you need to set a period here and the time format
shall be 24H.
Search Search record.
Record Set record mode.
Remote device It is the connected IPC setup.
1 Recording status 3 Video loss
2 Motion detection 4 Camera lock