IC Realtime 4 Channel Forensic Network Video Recorder User Manual
Page 70
![background image](/manuals/679004/70/background.png)
61
Here you can set a multiple cast group. Please refer to the following sheet for detailed
information.
z
IP multiple cast group address
-224.0.0.0-239.255.255.255
-“D” address space
z
The higher four-bit of the first byte=”1110”
z
Reserved local multiple cast group address
-224.0.0.0-224.0.0.255
-TTL=1 When sending out telegraph
-For example
224.0.0.1 All
systems in the sub-net
224.0.0.2 All routers in the sub-net
224.0.0.4 DVMRP router
224.0.0.5 OSPF router
224.0.0.13 PIMv2 router
z
Administrative scoped addressees
-239.0.0.0-239.255.255.255
-Private address space
z
Like the single broadcast address of RFC1918
z
Can not be used in Internet transmission
z
Used for multiple cast broadcast in limited space.
Except the above mentioned addresses of special meaning, you can use other addresses. For
example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
After you logged in the Web, the Web can automatically get multiple cast address and add it to
the multiple cast groups. You can enable real-time monitor function to view the view.
Please note multiple cast function applies to special series only.
4.2.5.5.5 Email
The email interface is shown as below. See Figure 4-68.
z
SMTP server: Please input your email SMTP server IP here.
z
Port: Please input corresponding SMTP port value here.
z
Anonymous: Check the box here to enable anonymous function. In this mode, you do not
need to input user name and password to login the SMTP server.
z
User name: Please input the user name to login the sender email box. You do not need to
set user name if you have enabled anonymous function.
z
Password: Please input the corresponding password here. You do not need to set password
if you have enabled anonymous function.
z
Sender: Please input sender email box here.
z
Title: Please input email subject here. System support English character and Arabic number.
Max 32-digit.
z
Attachment: Check the box here to enable attachment function.
z
Receiver: Please input receiver email address here. System max supports 3 email boxes.
z
Encrypt type: The option includes: NONE, SSL, TLS.
z
Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval.