IC Realtime 4 Channel Forensic Network Video Recorder User Manual
Page 37
![background image](/manuals/679004/37/background.png)
28
c) On the PIP interface, click
at the top left corner to select a channel you want to
display. You can select
to set mixed audio and then click
to save. See Figure
4-21.
Figure 4-21
Note
z
: can only be displayed on the first channel and can only be displayed on
the second channel. You can click
at the top left corner to set mixed audio. P1 is the
mixed audio of channel 1 and channel 3. P2 is the mixed audio of channel 2 and channel 4.
During the preview mode, you can not select P1 and P2 at the same time. It is the output
audio of the preview interface, that is to say it is the audio of the channel P on the PIP mode.
z
You can use mouse to drag the PIP picture to the proper position and drag mouse to zoom
in or zoom out.
4.1.9 Real-time Burning and CD Playback
This series product can burn real-time video to the CD for future reference. You can click the
REC/STOP at the front panel to start or stop burning. Or you can go to the burning interface
via the right-click mouse menu. Please follow the steps listed below.
a) One the preview interface, right click mouse and then select real-time burning. You can
see an interface shown as in Figure 4-22. Please note the record channel needs to set
as P (PIP), otherwise, you can not see the three setup buttons on the right pane.