2 overview and controls, 1 front panel, 2 rear panel – IC Realtime 4 Channel Forensic Network Video Recorder User Manual
Page 15
![background image](/manuals/679004/15/background.png)
6
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series
NVR for the first time, please refer to this part first.
2.1 Front Panel
The front panel is shown as in Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
Button Name
Icon
Function
HDD record indicator
light
1-4
The corresponding HDD is recording when it is on.
Network abnormal
indicator light
NET
It is to alert you when network is abnormal or no
connection.
Remote control
indicator light
ACT
Remote control indicator light
Power indicator light
The light is on when power connection is OK.
Burning Start/stop
REC/ST
OP
z
REC:Start burning.
z
STOP:Stop burning.
Cancel
ESC
Exit
Microphone
Microphone port.
Line audio input
Line audio input port.
Line audio output
Line audio output port.
USB port
Connect to mouse, HDD and etc.
2.2 Rear Panel
The NVR rear panel is shown as below. See Figure 2-2.