IC Realtime Combo Series: 8 Channel DVR with built-in 10 LCD monitor - Manual (Page 57)

48
Figure 5-1
5.3 Setting
In main menu, highlight setting icon and double click mouse. System setting interface is shown
as below. See
X356H356H356H
Figure 5-2.
X
Figure 5-2
5.3.1 General
General setting includes the following items. See Figure 5-3.
z
System time: Here is for you to set system time
z Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
z Snapshot: Here you can set snapshot interval.
z Date separator: There are three denotations to separate date: dot, beeline and solidus.
z DST: Here you can set DST time and date. Please enable DST function and then click set
button. You can see an interface is shown as in Figure 5-4. Here you can set start time and
end time by setting corresponding week setup. In Figure 5-4, enable date button, you can
see an interface is shown as in Figure 5-5. Here you can set start time and end time by
setting corresponding date setup.
z Time format: There are two types: 24-hour mode or 12-hour mode.
z LCD shutdown: Here you can set the LCD auto shutdown time after system is invalid for the
specified time. The max setup is 120 minutes.